The board generally supports processors with a TDP up to 95W. Recommended Upgrades: Core 2 Quad Q9xx0/Q8xx0 (Yorkfield Core, 95W) Core 2 Duo E8xxx/E7xxx (Wolfdale Core, 65W)
This report summarizes the H-IG41-UATX Rev 1.1 manual, highlighting scope, key features, installation and setup steps, configuration and usage guidance, maintenance and troubleshooting, safety and compliance, and recommended improvements. h-ig41-uatx rev 1.1 manual
If the system fails to boot after a BIOS change: Turn off the PC and unplug the power. Locate the 3-pin jumper (usually near the battery). The board generally supports processors with a TDP up to 95W
Ensure the dedicated 4-pin 12V power lead from the power supply is firmly clicked into the socket near the CPU. The board will spin fans but fail to post without this connection. Locate the 3-pin jumper (usually near the battery)
PC3-10600 (1333 MHz) or PC3-8500 (1066 MHz). Higher rated modules will underclock to match the Front Side Bus limits.
(usually yellow or black) located at the bottom-right of the board. Tiger Technik Description Power Switch Connects to the case power button to turn the PC on/off. Reset Switch Connects to the reset button (if available). Hard Drive LED Indicates disk activity. Indicates when the system is powered on. CPU Upgrade Path