Once the light stops flashing, the update is finished. Unplug the USB and restart the TV. Resolution Remote Codes
| Problem | Cause | Solution | |---------|-------|----------| | Wrong resolution or "no signal" | Firmware mismatched to 1366x768 | Flash correct 1366x768 .bin | | Split screen or vertical lines | LVDS mapping error (VESA/JEIDA) | Try alternate firmware version | | Backlight on but black screen | Panel voltage or LVDS link wrong | Check jumper (3.3V/5V/12V) | | Image upside down | Mirror firmware flag set | Flash firmware with correct panel orientation | | USB not detected | Drive format or filename error | Use FAT32, exact filename | T.vst59.031 Firmware 1366x768
Are you currently facing a specific issue, such as a or distorted colors ? Once the light stops flashing, the update is finished
jumper on the board before powering on a new panel, as the firmware does not control the physical voltage output to the screen. Service Menu codes for this specific board or help identifying your LVDS cable type jumper on the board before powering on a