Disco 240 Dmx Controller Manual [upd]

Select your first scene or adjust faders for your first "look." ) to save the step. The screen should show "Step 001". Change your lights for the next look and press again for "Step 002." Repeat until your sequence is finished, then exit 🕹️ Essential Controls

: Turn on all controlled fixtures first, then turn on the controller to avoid potential damage. disco 240 dmx controller manual

Press and hold the button for approximately three seconds until the small LED indicator next to it begins to flash. This flashing light confirms the board is ready to record data. Phase 2: Designing and Saving a Scene Select your first scene or adjust faders for

: Move the channel faders to adjust pan, tilt, color, strobe, and intensity. Use the Page Select button to access channels higher than 8. Save the Configuration : Press the Midi/Rec button once. Press and hold the button for approximately three

The Disco 240 is built on the international DMX512 standard, allowing it to communicate with various fixtures like moving heads and LED PAR lights. : 240 DMX channels.

Manages 12 scanners/fixtures (up to 20 channels each).