Configures automated alert flags based on preset door cycle thresholds. Troubleshooting Common Failures 1. The Door Will Only Move via Hold-to-Run Product datasheet - ASSA ABLOY ENTRANCE SYSTEMS
This usually indicates a fault with the torque guard, encoder, or a memory error in the control card. crawford cdm9 950 installation manual top
Power down, unmount the system cable plug, check for bent pins, clean, and reseat. Configures automated alert flags based on preset door
Check the X4 and X5 contacts on the lid of the control box; if these aren't seated correctly, the safety circuit stays open. unmount the system cable plug