Portable benchtop class (approx. 20–25 kg depending on wire spool size) Machine Anatomy and Control Panel Layout
Features a two-roller wire drive system. It is critical to match the drive roller groove to the wire type (serrated for flux-cored/soft wire and smooth for solid/hard wire). Adjustments: cem dual mig 120 manual
DCEP (Direct Current Electrode Positive). The torch lead connects to the positive (+) terminal; the ground clamp connects to the negative (-) terminal. Wire Type: Solid ER70S-6 steel wire. Shielding Gas: 75% Argon / 25% CO2cap C cap O sub 2 mix (for carbon steel) or 100% CO2cap C cap O sub 2 (for deeper penetration on thicker metals). Portable benchtop class (approx
Multi-step toggle switches for precise heat control Compatible Wire Diameters: Solid Steel (Gas): 0.6mm to 0.8mm (0.023" to 0.030") Flux-Cored (Gasless): 0.8mm to 0.9mm (0.030" to 0.035") Stainless Steel / Aluminum: 0.8mm Cooling System: Forced-air fan cooled Adjustments: DCEP (Direct Current Electrode Positive)
Remove the gas nozzle and unscrew the copper contact tip from the end of the torch.