Operating temperature range of -10 to +50 °C. Enclosure Options: Standard: IP65 ABS plastic. Variants: Stainless steel (TPL-400S), Die-cast ( ), or DIN-rail ( 2. Installation and Wiring The TPL400 supports both 4-wire and 6-wire load
| Error Code | Meaning | Manual Solution | | :--- | :--- | :--- | | | Printhead over-temperature | Let printer cool. Reduce DARKNESS setting. | | ERROR 2 | Media out / Sensor not detected | Reload labels. Clean the gap sensor with a lint-free cloth. | | ERROR 3 | Ribbon out (TT mode) | Install new ribbon. If ribbon is present, re-run calibration. | | ERROR 5 | Printhead lift mechanism open | Close the printhead latch firmly until you hear a click. | | COMMS TIMEOUT | PC-to-printer communication lost | Check cable pins. Match baud rate (default is 9600, N, 8, 1). | Enclosure Options: Standard: IP65 ABS plastic
Analog outputs can be scaled and inverted through the programming unit. Advanced Features