Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Upd __hot__ 📥

| Problem | Probable cause | Solution | |---------|----------------|---------| | No power | Adapter unplugged | Check outlet, reconnect | | Erratic readings | Movement during test | Repeat without talking | | "Err 1" | Cuff too loose | Refasten and restart | | "Err 4" | Battery low | Charge 2 hours | | Bluetooth fails | Device out of range | Move within 5 meters | | Display shows "CAL" | Calibration overdue | Contact service center |

10

Connect a safety edge or a NC (Normally Closed) emergency stop button. If not used, keep this terminal bridged. | Problem | Probable cause | Solution |

Please read this entire document carefully before beginning any installation, using the device, or performing maintenance. For your convenience, you can also download the latest PDF version of this manual directly from the manufacturer’s website or scan the QR code provided on the back cover of the product packaging. For your convenience, you can also download the

Tension the chain or belt using the tensioner nut at the front of the rail until it sits taut but flexible. Step 2: Mount the Rail to the Header Wall For your convenience

Initiate a close cycle using your programmed remote transmitter.