Standard desktop cases break out front panel connections into small 2-pin DuPont cables. Use the following exact pin configurations to hook them up manually:
| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | MIC2_L | 2 | GND | | 3 | MIC2_R | 4 | PRESENCE# | | 5 | LINE2_R | 6 | SENSE1_RETURN | | 7 | SENSE_SEND | 8 | LINE2_L | | 9 | SENSE2_RETURN | 10 | GND | acer ipisb-vr rev 1.01 front panel
These are keyed 9-pin headers (with one missing pin), labeled F_USB1 , F_USB2 , etc. Be careful not to accidentally plug a FireWire cable here. The color wires vary by case, but the pinout is standard: VCC (+5V) , Data -, Data +, and Ground. Standard desktop cases break out front panel connections
Disclaimer: This information is based on user-documented experiences with the Acer IPISB-VR Rev 1.01 and may vary slightly based on specific OEM manufacturing variants. The color wires vary by case, but the
This guide provides the exact pinout diagram, color codes, and step-by-step instructions needed to successfully wire your chassis cables to the Acer IPISB-VR Rev 1.01 front panel header. Understanding the Acer Front Panel Layout
The front panel header on this board is typically a 14-pin or 10-pin block located near the bottom right edge. The pins are numbered in an alternating fashion: even numbers on one row and odd numbers on the other. Connection Description HDD LED + Hard Drive Activity Light (Positive) 2 Power LED + Power Indicator Light (Positive) 3 HDD LED - Hard Drive Activity Light (Negative) 4 Power LED - Power Indicator Light (Negative) 5 Reset SW Reset Switch Not Polarized 6 Power SW Power Button Not Polarized 7 Reset SW Reset Switch (Ground) Not Polarized 8 Power SW Power Button (Ground) Not Polarized 10 Empty Key Pin (Missing) 12 LAN LED + Network Activity Light (Positive) 14 LAN LED - Network Activity Light (Negative) Key Installation Tips